 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD74ALVC1G86 2-input Exclusive-OR Gate ADE-205-608A (Z) 2nd. Edition March 2001 Description The HD74ALVC1G86 performs the Boolean functions Y = A B or Y = AB + AB in positive logic. A common application is as a true / complement element. If one of the inputs is low, the other input will be reproduced in true form at the output. If one of the inputs is high, the signal on the other input will be reproduced inverted form at the output. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features * The basic gate function is lined up as hitachi uni logic series. * Supplied on emboss taping for high speed automatic mounting. * Supply voltage range : 1.2 to 3.6 V Operating temperature range : -40 to +85C * All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V) All outputs VO (Max.) = 3.6 V (@VCC = 0 V) * Output current 2 mA (@VCC = 1.2 V) 4 mA (@VCC = 1.4 V to 1.6 V) 6 mA (@VCC = 1.65 V to 1.95 V) 18 mA (@VCC = 2.3 V to 2.7 V) 24 mA (@VCC = 3.0 V to 3.6 V) HD74ALVC1G86 Outline and Article Indication * HD74ALVC1G86 Marking A 8 VSON-5 = Control code Function Table Inputs A L L H H H : High level L : Low level B L H L H L H H L Output Y Pin Arrangement IN B 1 5 VCC IN A 2 GND 3 4 OUT Y (Top view) 2 HD74ALVC1G86 Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 *1, 2 Symbol VCC VI VO Ratings -0.5 to 4.6 -0.5 to 4.6 -0.5 to VCC + 0.5 -0.5 to 4.6 Unit V V V Test Conditions Output voltage range Output : H or L VCC : OFF Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation at Ta = 25C (in still air) *3 Storage temperature Notes: I IK I OK IO I CC or IGND PT Tstg -50 50 50 100 200 -65 to 150 mA mA mA mA mW C VI < 0 VO < 0 or VO > VCC VO = 0 to VCC The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 4.6 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C. 3 HD74ALVC1G86 Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO I OH Min 1.2 0 0 -- -- -- -- -- I OL -- -- -- -- -- Input transition rise or fall rate t / v 0 0 Operating free-air temperature Ta -40 Max 3.6 3.6 VCC -2 -4 -6 -18 -24 2 4 6 18 24 20 10 85 C ns / V Unit V V V mA VCC = 1.2 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 1.2 V VCC = 1.4 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 1.2 to 2.7 V VCC = 3.30.3 V Conditions Note: Unused or floating inputs must be held high or low. 4 HD74ALVC1G86 Electrical Characteristic * Ta = -40 to 85C Item Input voltage Symbol VCC (V) * VIH 1.2 1.4 to 1.6 Min VCCx0.7 Typ Max -- -- -- -- -- VCCx0.25 VCCx0.3 VCCx0.3 0.7 0.8 -- -- -- -- -- -- 0.2 0.3 0.3 0.3 0.55 0.55 5 10 5 -- A A A pF V I OH = -100 A I OH = -2 mA I OH = -4 mA I OH = -6 mA I OH = -18 mA I OH = -24 mA I OL = 100 A I OL = 2 mA I OL = 4 mA I OL = 6 mA I OL = 18 mA I OL = 24 mA VIN = 3.6 V or GND VIN = VCC or GND, IO = 0 VI or VO = 0 to 3.6 V VIN = VCC or GND Unit V Test condition VCCx0.75 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 2.5 1.65 to 1.95 VCCx0.7 2.3 to 2.7 3.0 to 3.6 VIL 1.2 1.4 to 1.6 1.7 2.0 -- -- 1.65 to 1.95 -- 2.3 to 2.7 3.0 to 3.6 Output voltage VOH Min to Max 1.2 1.4 1.65 2.3 3.0 VOL Min to Max 1.2 1.4 1.65 2.3 3.0 Input current Quiescent supply current Output leakage current I IN I CC I OFF 3.6 3.6 0 3.3 -- -- VCC-0.2 0.9 1.1 1.2 1.7 2.2 -- -- -- -- -- -- -- -- -- -- Input capacitance CIN Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. 5 HD74ALVC1G86 Switching Characteristics * VCC = 1.2 V Item Symbol Ta = -40 to 85C Unit Test Max -- ns FROM TO (Output) Y Min Propagation delay time t PLH t PHL -- Typ 7.5 Conditions (Input) CL = 15 pF A or B * VCC = 1.5 0.1 V Item Symbol Ta = -40 to 85C Unit Test Max 8.0 ns FROM TO (Output) Y Min Propagation delay time t PLH t PHL 2.0 Typ -- Conditions (Input) CL = 15 pF A or B * VCC = 1.8 0.15 V Item Symbol Ta = -40 to 85C Unit Test Max 6.0 ns FROM TO (Output) Y Min Propagation delay time t PLH t PHL 1.5 Typ -- Conditions (Input) CL = 30 pF A or B * VCC = 2.5 0.2 V Item Symbol Ta = -40 to 85C Unit Test Max 4.0 ns FROM TO (Output) Y Min Propagation delay time t PLH t PHL 1.0 Typ -- Conditions (Input) CL = 30 pF A or B * VCC = 3.3 0.3 V Item Symbol Ta = -40 to 85C Unit Test Max 3.0 ns FROM TO (Output) Y Min Propagation delay time t PLH t PHL 1.0 Typ -- Conditions (Input) CL = 30 pF A or B 6 HD74ALVC1G86 Operating Characteristics Item Symbol VCC (V) Ta = 25C Min Power dissipation capacitance CPD 1.5 1.8 2.5 3.3 -- -- -- -- Typ 10.5 10.5 10.5 11.5 Max -- -- -- -- pF f = 10 MHz Unit Test Conditions Test Circuit VCC Pulse Generator Z out = 50 Input Output CL RL Symbol RL CL V CC = 1.2 V, V = 2.50.2 V, V = 1.80.15 V CC 1.50.1 V CC 3.30.3 V 2.0 k 15 pF 1.0 k 30 pF 500 30 pF Note: CL includes probe and jig capacitance. 7 HD74ALVC1G86 * Waveforms tr tf 90% Input V ref 10% t PLH 90% V ref 10% t PHL VIH GND VOH In phase output V ref V ref VOL t PHL t PLH VOH Out of phase output V ref V ref VOL Symbol tr / t f V IH V ref V CC = 1.2 V, 1.50.1 V, V CC = 2.50.2 V 1.80.15 V 2.0 ns VCC 50% 2.5 ns VCC 50% V CC = 3.30.3 V 2.5 ns 2.7 V 1.5 V Note: Input waveform : PRR = 10 MHz, duty cycle 50% 8 HD74ALVC1G86 Package Dimensions As of January, 2001 Unit: mm 0.50 0.50 0.12 0.05 5 -- 0.2 0.05 1.6 0.05 0.55 0.05 1.60 0.05 1.20 0.05 Hitachi Code JEDEC EIAJ Mass (reference value) TNP-5D 9 HD74ALVC1G86 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Copyright (c) Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Colophon 3.0 10 |
Price & Availability of HD74ALVC1G86
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |